| Message: | ***Invalid equip ([device]) at [time]: ([text]) |
| Description: | The specified equipment is unknown/invalid. |
| Resolution: | Correct equipment reference in the import scenario, if desired. |
| Message: | [aircraft] is read only |
| Description: | Aircraft characteristic data is read only. |
| Resolution: | Check user authority and scenario directory/file-permissions. |
| Message: | Change equip failed: [equip name] not found. |
| Description: | Specified equipment cannot be located. |
| Resolution: | Correct inconsistency in import data. |
| Message: | Change position failed: [position name] not found. |
| Description: | Import caused a change to be attempted to a non-existent position. |
| Resolution: | Correct inconsistency in import data. |
| Message: | Console type [position indicator] specified on invalid sector [sector]. Ignoring. |
| Description: | Console cannot be assigned to sector position. |
| Resolution: | Correct console assignment or sector definition in import scenario. |
| Message: | DNREC: invalid radar [radar]. Ignoring. |
| Description: | The specified radar is invalid. It will be ignored. |
| Resolution: | Correct invalid radar reference in import data if desired. |
| Message: | Duplicate achar name [aircraft] not allowed. |
| Description: | An aircraft characteristic with the same name already exists. Cannot create duplicate aircraft. |
| Resolution: | Delete the aircraft record from scenario, or from import file. |
| Message: | Duplicate equip [equip name] in [adaptation name] |
| Description: | Equipment with the same name already exists. |
| Resolution: | Modify/remove duplicate item in import or working scenario. |
| Message: | Duplicate equip [equip name] in sector [ID] |
| Description: | Equipment with the same name already exists in the sector. |
| Resolution: | Modify/remove duplicate item in import or working scenario. |
| Message: | Duplicate radar name [radar name] in [adaptation name] |
| Description: | A radar with the same name already exists. |
| Resolution: | Modify/remove duplicate item in import or working scenario. |
| Message: | Duplicate rsi description [RSI description] |
| Description: | (Warning) more than one RSI found with the same description in input data. |
| Resolution: | Modify RSI description(s) as desired in either import or working scenario. |
| Message: | Duplicate rsi value [value] |
| Description: | (Warning) duplicate RSI value found in input data. |
| Resolution: | Correct in the import scenario, if desired. |
| Message: | Error adding PLANE target [target]: [error(s)] |
| Description: | One or more errors have occurred while adding the specified target. |
| Resolution: | Correct errors for specified target in import scenario. |
| Message: | Error opening [filename]: [OS error description] |
| Description: | An error occurred opening the input file (OS error description is given). |
| Resolution: | Check user authority and scenario directory/file-permissions. |
| Message: | ImportNASSIM: R Position with no sectorPosition!! |
| Description: | Import referenced an R-position that is not assigned a sector. |
| Resolution: | Correct inconsistency in import data. |
| Message: | Invalid console type [position indicator] specified on equip card [name]. Ignoring. |
| Description: | Import scenario contains a reference to an invalid equipment type. |
| Resolution: | Correct equipment type in the import scenario. |
| Message: | Invalid equip card [card name]: Invalid position type [position type]. Ignoring. |
| Description: | Import data contains a reference to an invalid position type. |
| Resolution: | Correct position type in import scenario. |
| Message: | Invalid equip card [card name]: Invalid range setting [setting]. Ignoring. |
| Description: | Import scenario specifies invalid range for position. |
| Resolution: | Correct in import scenario. |
| Message: | Invalid maneuver time [time] for [target]. Ignoring. |
| Description: | The specified maneuver time is invalid. Maneuver will be ignored. |
| Resolution: | Correct invalid time for maneuver in import scenario if desired. |
| Message: | Invalid nadin equip card [card name]: No custom header, yet equip name is < 3 chars. Ignoring. |
| Description: | Import scenario contains a reference to NADIN equipment with an invalid format. |
| Resolution: | Correct in import scenario. |
| Message: | Invalid name |
| Description: | Import data contains a reference to an invalid or null target name. |
| Resolution: | Correct errors in import data. |
| Message: | Invalid route |
| Description: | Target has an invalid route. |
| Resolution: | Correct route errors in import data or in working scenario. |
| Message: | Invalid rte [route name] while processing ([message text]) |
| Description: | (Warning) Invalid route specified in import scenario. |
| Resolution: | Correct error(s) in import scenario. |
| Message: | MESAG: invalid radar [radar]. Ignoring. |
| Description: | The specified radar is invalid. Message/command will be ignored. |
| Resolution: | Correct invalid radar reference in import data if desired. |
| Message: | No aircraft characteristics set |
| Description: | Import caused a target to be imported without aircraft characteristics being set. |
| Resolution: | Investigate import scenario. |
| Message: | No RADAR, NRADR, or MERGE card found. Aborting. |
| Description: | Import scenario does not contain required data. |
| Resolution: | Correct errors in import scenario or specify a different source. |
| Message: | No starttime found for [target] |
| Description: | Start-time for the specified target cannot be determined from import data. |
| Resolution: | Investigate/correct errors in import scenario, or ignore/delete target. |
| Message: | Radar from nonRadar error ([message text]): Invalid field 4 |
| Description: | Invalid beacon code in import data. |
| Resolution: | Correct errors in import data. |
| Message: | Radar from nonRadar error ([message text]): Invalid field 5 |
| Description: | Invalid speed in import data. |
| Resolution: | Correct errors in import data. |
| Message: | Radar from nonRadar error ([message text]): Invalid route [route]: [CREATE ROUTE error] |
| Description: | A target to be imported contained an invalid route. |
| Resolution: | Correct errors in import data. |
| Message: | Radar from nonRadar error while processing ([message text]): AM Invalid field 2 ([aircraft ID value]) |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Could not determine msg type |
| Description: | (Warning) Message text does not match predetermined message type. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): DM Invalid field 2 ([aircraft ID value]) |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): FP Invalid Field 10 [route value] |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): FP Invalid field 2 ([aircraft ID value]) |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): FP Invalid field 3 ([aircraft type value]) |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): FP Invalid field 5 [speed value] |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): FP Invalid field 6 ([coordination fix value]) |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): FP Invalid field 7 ([time value]) |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): FP Invalid field 8/9 ([altitude value]) |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid acid for JA command ([message text]) |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid ACID: JR command |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid altitude for JA command ([message text]) |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid Climb/Descent Rate for JR command |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid Field1 of JO command |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid Field1 of JS command |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid HDG |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid JA command [message text] |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid JB command: NO SFID |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid JC command |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid JE command: missing SFID |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid JE command: unknown SFID format |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid JR command: missing SFID |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid JR command |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid JS command |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid SFID for JO command |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Invalid target reliability value [reliability value] ([message text]) |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): JH command Missing SFID |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): No Acid Found |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Short DEP msg |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): Short msg |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar error while processing ([message text]): |
| Description: | (Warning) The specified message in import data has an invalid format. |
| Resolution: | Correct errors in import scenario. |
| Message: | Radar from nonRadar FPL error on ([message text]): Invalid AID [aircraft ID value] |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar FPL error on ([message text]): Invalid field [number] [field value] |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar FPL error on ([message text]): No adapted FIRB found for incoming ICAO flight |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar FPL error on ([message text]): No FIRB found for incoming ICAO flight |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar FPL error on ([message text]): Short FPL/CPL msg |
| Description: | (Warning) Import data contains a message with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar FPL error on ([message text]): SPP could not be found on inbound ICAO flight |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar FPL error on ([message text]): VFR flevel. |
| Description: | (Warning) Import data contains a flight plan with invalid format or content. |
| Resolution: | Investigate/correct errors in import scenario, if desired. |
| Message: | Radar from nonRadar warning ([target]): AChar [aircraft name] not found, added to scenario. |
| Description: | (Warning) Import scenario contains aircraft type not already known to scenario. |
| Resolution: | n/a |
| Message: | Rsi [RSI identifier] does not have a description |
| Description: | (Warning) RSI found with no description in input data. |
| Resolution: | If desired, add RSI description in import or working scenario. |
| Message: | Rsi not populated |
| Description: | Import scenario has an RSI with an invalid format. |
| Resolution: | Ignore, or correct entry in import scenario. |
| Message: | Rsi value [value] out of range |
| Description: | (Warning) Import scenario has an RSI with an invalid format. |
| Resolution: | Correct in the import scenario, if desired. |
| Message: | [filename] not found ! |
| Description: | Specified filename does not exist or is not an appropriate file type |
| Resolution: | Check filename, path, file-permissions, and file format. |
| Message: | Couldn't determine device for FP message |
| Description: | A device could not be found in adaptation to enter the flight plan. |
| Resolution: | Investigate/correct errors in import data or scenario adaptation. |
| Message: | Empty Flight entry |
| Description: | TGF data has unexpected/invalid format. |
| Resolution: | Investigate/correct errors in import data, or choose another TGF file to import. |
| Message: | Error adding event : Tgtevent time [time value] is earlier than target starttime |
| Description: | Import file specified a target event with a time earlier than the target start-time - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Failed to add speed change event : Tgtevent time [time value] is earlier than target starttime |
| Description: | TGF data specifies a speed change with an invalid time for the target. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Ignored [target] |
| Description: | Informational message during import - this message should be preceded by a more specific error message. |
| Resolution: | Investigate/correct errors in import data, if desired. |
| Message: | Ignoring tag : [tag value] |
| Description: | (Warning) Import file contains an unknown element that will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid ACID : [ACID value] |
| Description: | An invalid aircraft ID was found in import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data, if desired. |
| Message: | Invalid aircraft type : [aircraft type value] |
| Description: | An invalid aircraft type value was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data, if desired. |
| Message: | Invalid arrival runway : [runway value] |
| Description: | An invalid runway value was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid beacon : [beacon code value] |
| Description: | An invalid beacon code was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid complexity : [complexity value] |
| Description: | An invalid complexity level was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data, if desired. |
| Message: | Invalid departure runway : [runway value] |
| Description: | An invalid runway value was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid frequency : [frequency value] |
| Description: | An invalid frequency was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid interim altitude : [altitude value] |
| Description: | An invalid altitude was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid nav equip type : [navigation equipment type] |
| Description: | An invalid navigation equipment type was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid nav type : [navigation type] |
| Description: | An invalid navigation type was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid start altitude : [altitude value] |
| Description: | An invalid altitude was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid start speed : [speed value] |
| Description: | An invalid speed was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid start type : [start type value] |
| Description: | An invalid start type was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid target altitude : [altitude value] |
| Description: | An invalid altitude was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid target speed : [speed value] |
| Description: | An invalid speed was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Invalid time : [time value] |
| Description: | An invalid time value was found in import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data, if desired. |
| Message: | Multiple Flights tags encountered. |
| Description: | TGF data has unexpected/invalid format. |
| Resolution: | Investigate/correct errors in import data, or choose another TGF file to import. |
| Message: | No Flights tag found. |
| Description: | Import file does not appear to contain any flights. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Route error : [CREATE ROUTE error] |
| Description: | An error was encountered attempting to create the route specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Route error : Different runways specified in route and ArrivalRunway element |
| Description: | (Warning) Import file specifies two different runways for this target - runway value within route will be ignored. |
| Resolution: | Investigate/correct errors in import data, if desired. |
| Message: | Route error : Different runways specified in route and DepartureRunway element |
| Description: | (Warning) Import file specifies two different runways for this target - runway value within route will be ignored. |
| Resolution: | Investigate/correct errors in import data, if desired. |
| Message: | Route error : Ignoring bracket logic : [route element] |
| Description: | (Warning) Bracket logic that was neither a speed nor altitude adjustment was found - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Route error : Invalid bracket logic : [bracket logic] |
| Description: | Bracket logic was found with incorrect syntax - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Route error : Invalid flight level in bracket logic : [route element] |
| Description: | An invalid altitude was specified in route bracket logic - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Route error : Invalid route format ([route element]) |
| Description: | A route element within the route was determined to have an incorrect format - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Route error : Invalid runway format : "[runway value]" |
| Description: | An invalid runway was specified within a route - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Route error : Invalid speed in bracket logic : [route element] |
| Description: | An invalid speed was specified in route bracket logic - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Route error : Runway specified with non-end fix |
| Description: | Route specifies a runway for other than the first or last fix - this target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Unsupported nav equip : [navigation equipment type] defaulting to A |
| Description: | (Warning) An unsupported navigation equipment type was specified in the import file - default value used instead. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Unsupported nav type : [navigation type] defaulting to P |
| Description: | (Warning) An unsupported navigation type was specified in the import file - default value used instead. |
| Resolution: | Investigate/correct errors in import data or in working scenario, if desired. |
| Message: | Unsupported start type : [start type value] |
| Description: | An unsupported start type was specified in the import file - target will be ignored. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Unsupported type : [aircraft type value] |
| Description: | An aircraft type was specified in the import file that does not exist in adaptation for the scenario - target will be ignored. |
| Resolution: | Investigate/correct errors in import data or scenario adaptation. |
| Message: | ([timestamp]) error setting route on [target]: [CREATE ROUTE error] |
| Description: | Import file contains a target with an invalid route. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [time]: error creating tgt from ([message text]): Invalid field 4 |
| Description: | Invalid beacon code specified in import data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [time]: error creating tgt from ([message text]): Invalid field 5 |
| Description: | Invalid speed specified in import data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [time]: error creating tgt from ([message text]): Invalid route [text]: [CREATE ROUTE error] |
| Description: | Import file contained a target with an invalid route. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [time]: unrecognized nadin device ([device name]). Ignoring msg. |
| Description: | Import data references an unknown NADIN device. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [time]: warning creating tgt from ([message text]): AChar [aircraft] not found, added to scenario. |
| Description: | (Warning) |
| Resolution: | n/a |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ FP Invalid Field 10 [route value] ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ FP Invalid field 2 ([aircraft ID value]) ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ FP Invalid field 3 ([aircraft type value]) ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ FP Invalid field 5 [speed value] ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ FP Invalid field 6 ([coordination fix value]) ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ FP Invalid field 7 ([time value]) ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ FP Invalid field 8/9 ([altitude value]) ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ Invalid AID [aircraft ID value] ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ Invalid field [number] [field value] ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ No adapted FIRB found for incoming ICAO flight ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ No FIRB found for incoming ICAO flight ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ Short FPL/CPL msg ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ Short msg ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ SPP could not be found on inbound ICAO flight ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [timestamp]: -----REFORMAT FPL ERROR------ VFR flevel. ([message text]) |
| Description: | Import file contains invalid flight plan data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Couldn't find (at least one of) NA, IN, SW, SY, AN, or SC |
| Description: | At least one required table was not found on SAR tape. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | dummy read returned [status], expected 0!!! |
| Description: | An fatal error occurred while reading the tape header. |
| Resolution: | Repeat using another tape drive or tape, if feasible. |
| Message: | Duplicate equip name [name] in [adaptation] |
| Description: | (Warning) Import data contains duplicate equipment, or equipment already in scenario adaptation. |
| Resolution: | Modify/remove duplicate item in import data or working scenario, if desired. |
| Message: | Error creating TK route for [target] |
| Description: | Import data contains invalid route information. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Error opening [filename]: [OS error description] |
| Description: | An error occurred opening the specified file. |
| Resolution: | Check user, directory, and file permissions. See OS documentation for explanation of OS error. |
| Message: | Error reading label. |
| Description: | An error occurred while attempting to read the tape label. |
| Resolution: | Repeat using another tape drive or tape, if feasible. |
| Message: | Failed to run: [failure details] |
| Description: | SAR data could not be imported from the requested Job Shop source. |
| Resolution: | Check connectivity with job shop. |
| Message: | Library label empty. |
| Description: | A library label must be specified when importing SAR from tape. |
| Resolution: | Specify a valid library label and retry. |
| Message: | NO ETX!!! |
| Description: | Invalid import data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | No files have been selected. |
| Description: | No SAR files have been selected for import. |
| Resolution: | Select a file and try again. |
| Message: | No setting for jobshop executable |
| Description: | Location of jobshop executable is not properly specified in the resource file. |
| Resolution: | Re-install or configure application; contact support if problem persists. |
| Message: | NO STX!!! |
| Description: | Invalid import data. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Password field empty. |
| Description: | A valid user ID and password must be specified to connect to the Job Shop. |
| Resolution: | Specify valid user ID and password and retry. |
| Message: | Tape label empty. |
| Description: | A tape label must be specified when importing SAR from tape. |
| Resolution: | Specify a valid tape label and retry. |
| Message: | Unknown segcode 0x[segcode] at offset 0x[physical buffer address] |
| Description: | An error occurred while reading a record from tape. |
| Resolution: | Repeat using another tape drive or tape, if feasible. |
| Message: | User ID field empty. |
| Description: | A valid user ID and password must be specified to connect to the Job Shop. |
| Resolution: | Specify valid user ID and password and retry. |
| Message: | Warning! Empty EQUIP |
| Description: | Import data contains invalid equipment information. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | [target]: Error creating route: [CREATE ROUTE error] |
| Description: | (Warning) Invalid route found for target in import file. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Error - Invalid Acid: [aircraft ID] |
| Description: | Import file contains a target with an invalid aircraft ID. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | File [filename] not found. |
| Description: | Import file could not be found or was not a regular file. |
| Resolution: | Check file selection; verify user and file-permissions; check file format. |
| Message: | Warning AChar [aircraft type] for [target] does not exist |
| Description: | (Warning) Import file contains an unknown aircraft type. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Warning Target: [target] has invalid Altitude: [altitude] |
| Description: | (Warning) Import file contains a target with an invalid altitude. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Warning Target: [target] has invalid BCN: [beacon code] |
| Description: | (Warning) Import file contains a target with an invalid beacon code. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Warning Target: [target] has invalid CTime: [time] |
| Description: | (Warning) Import file contains a target with an invalid coordination time. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | Warning Target: [target] has invalid Speed: [speed] |
| Description: | (Warning) Import file contains a target with an invalid speed. |
| Resolution: | Investigate/correct errors in import data. |
| Message: | "[item]" could not be found. |
| Description: | (Warning) The specified item could not be found in adaptation. |
| Resolution: | n/a |
| Message: | ([radar name]) something's seriously wrong in changeRadarList! |
| Description: | Unexpected program error. |
| Resolution: | Note circumstances; contact support. |
| Message: | [aircraft] is read only |
| Description: | (Warning) Cannot modify a read-only aircraft. |
| Resolution: | n/a |
| Message: | [CREATE ROUTE error] |
| Description: | (Warning) An error occurred attempting to create the route. |
| Resolution: | See resolution for specific error message in CREATE ROUTE error table. |
| Message: | [target name] is read only |
| Description: | (Warning) Cannot modify a target that is read-only. |
| Resolution: | n/a |
| Message: | Adapted achars may not be deleted. |
| Description: | self-explanatory |
| Resolution: | Remove from adaptation if item must be deleted. |
| Message: | Adapted equipment may not be deleted. |
| Description: | self-explanatory |
| Resolution: | Remove from adaptation if item must be deleted. |
| Message: | Adapted radar may not be deleted. |
| Description: | self-explanatory |
| Resolution: | Remove from adaptation if item must be deleted. |
| Message: | Adapted radar msg may not be deleted. |
| Description: | An adapted radar message may not be deleted. |
| Resolution: | Remove from adaptation if item must be deleted. |
| Message: | Cannot add AChar [aircraft type] |
| Description: | (Warning) A problem occurred while attempting to add the specified aircraft. |
| Resolution: | Ensure aircraft characteristics are valid and completely filled in; ensure aircraft is not a duplicate of aircraft already known to scenario adaptation. |
| Message: | Cannot add Equip '[name]' |
| Description: | A problem occurred attemtping to add the specified equipment to adaptation. |
| Resolution: | Ensure name and LDN values are not a duplicates of existing equipment. |
| Message: | Cannot add Radar '[radar]': Duplicate radar name [radar] in [adaptation] |
| Description: | self-explanatory |
| Resolution: | Choose a different radar name. |
| Message: | Cannot add RSI '[description]' |
| Description: | (Warning) A problem occurred adding the specified RSI. |
| Resolution: | Ensure value and description are valid and are not duplicates of existing RSI. |
| Message: | Cannot have multiple time intervals without a Stop time. [linebreak] ([start time] - None) already exists. |
| Description: | (Warning) Only one 'open-ended' radar message interval is allowed and new intervals may not overlap any existing interval. |
| Resolution: | Ensure new interval does not overlap existing intervals and re-attempt. |
| Message: | Change equip failed: [equip name] not found. |
| Description: | Specified equipment cannot be located. |
| Resolution: | Input inconsistency - reattempt; note circumstances and contact support if problem persists. |
| Message: | Change position failed: [position name] not found. |
| Description: | Cannot change a non-existent position. |
| Resolution: | Input inconsistency - reattempt; note circumstances and contact support if problem persists. |
| Message: | Change Site Definition failed: [site] not found. |
| Description: | (Warning) Site cannot be found. |
| Resolution: | Input inconsistency - reattempt; note circumstances and contact support if problem persists. |
| Message: | Change Site Definition failed: [site]'s Adaptation [name] not found. |
| Description: | (Warning) Adaptation for the new site is not found. |
| Resolution: | Input inconsistency - reattempt; note circumstances and contact support if problem persists. |
| Message: | Duplicate achar name [aircraft] not allowed. |
| Description: | (Warning) Cannot add a duplicate aircraft. |
| Resolution: | n/a |
| Message: | Duplicate equip [name] in [adaptation] |
| Description: | (Warning) Equipment name must be unique within a given adpatation. |
| Resolution: | n/a |
| Message: | Duplicate equip [position name] in sector position [sector ID] |
| Description: | Cannot add a position with the same name to the same sector. |
| Resolution: | Choose a different name. |
| Message: | Duplicate equip name [position] in sector position [sector ID] |
| Description: | Cannot add a position with the same name to the same sector. |
| Resolution: | Choose a different name. |
| Message: | Duplicate Rsi description not allowed. [RSI description] already exists. |
| Description: | (Warning) Cannot modify RSI description to a value that already exists. |
| Resolution: | Use a different description. |
| Message: | Duplicate Rsi not allowed. [RSI value] already exists. |
| Description: | (Warning) Cannot modify RSI value to a value that already exists. |
| Resolution: | Use a different value. |
| Message: | Duplicate sector id [value] in [adaptation] |
| Description: | Cannot add duplicate sector IDs to a single adaptation. |
| Resolution: | Choose a different sector ID and re-attempt. |
| Message: | Empty achar name |
| Description: | Aircraft name may not be blank. |
| Resolution: | Use a non-blank aircraft name. |
| Message: | Error deleting [system command] |
| Description: | An error occurred while attempting to delete a system command. |
| Resolution: | Note the scenario and system command value; reattempt; contact support if problem persists. |
| Message: | Error processing [pre-programmed event] |
| Description: | (Warning) Cannot locate pre-programmed event to be modified. |
| Resolution: | Input inconsistency - reattempt; note circumstances and contact support if problem persists. |
| Message: | Error processing [prompt] |
| Description: | (Warning) Prompt to be modified cannot be located. |
| Resolution: | Input inconsistency - reattempt; note circumstances and contact support if problem persists. |
| Message: | Error processing [system command] |
| Description: | (Warning) Cannot locate the specified system command. |
| Resolution: | Input inconsistency - reattempt; note circumstances and contact support if problem persists. |
| Message: | New interval ([start time] - [stop time]) overlaps another interval ([start time] - [stop time]). |
| Description: | (Warning) New radar message intervals may not overlap existing intervals. |
| Resolution: | Ensure new interval does not overlap existing intervals and re-attempt. |
| Message: | Only the last interval can be without a Stop time. |
| Description: | (Warning) A radar message time interval with 'none' for a stop time must start after all other existing intervals end. |
| Resolution: | Ensure new interval does not overlap existing intervals and re-attempt. |
| Message: | PreProgEvent is read-only |
| Description: | (Warning) Cannot modify a read-only pre-programmed event. |
| Resolution: | n/a |
| Message: | Profile Already Exists |
| Description: | (Warning) An identical aircraft behavior profile already exists - new profile will not be added. |
| Resolution: | n/a |
| Message: | Prompt is read-only |
| Description: | (Warning) Cannot modify a read-only prompt. |
| Resolution: | n/a |
| Message: | RadarDialog::& - invalid Type index [index] |
| Description: | Unknown type of radar specified during edit. |
| Resolution: | Choose a radar type from the dropdown box and re-attempt. |
| Message: | RadarDialog::syncRadarState - invalid Type index [index] |
| Description: | Unknown type of radar specified during edit. |
| Resolution: | Choose a radar type from the dropdown box and re-attempt. |
| Message: | RdrMsgDialog::setMsgType - error converting word 0 |
| Description: | Unexpected value for word 0 of radar message. |
| Resolution: | Ensure value for word 0 is between 0 and FFF hex. |
| Message: | RdrMsgDialog>> - error converting word [index] |
| Description: | Unexpected value for a data word of a radar message. |
| Resolution: | Ensure value for word 0 is between 0 and FFF hex. |
| Message: | RdrStsDialog& - error setting PSRState - unknown state: [state] |
| Description: | Unexpected error - unknown state specified in dialog. |
| Resolution: | Re-attempt using value from dropdown selector. |
| Message: | RdrStsDialog& - error setting SSRState - unknown state: [state] |
| Description: | Unexpected error - unknown state specified in dialog. |
| Resolution: | Re-attempt using value from dropdown selector. |
| Message: | Start time ([time]) occurs during another interval ([start time] - [stop time]). |
| Description: | (Warning) New radar message intervals may not overlap existing intervals. |
| Resolution: | Ensure new interval does not overlap existing intervals and re-attempt. |
| Message: | Start time ([time]) occurs during another interval without a Stop time ([start time] - None). |
| Description: | (Warning) New radar message intervals may not overlap existing intervals. |
| Resolution: | Ensure new interval does not overlap existing intervals and re-attempt. |
| Message: | Stop time ([time]) occurs during another interval ([start time] - [stop time]). |
| Description: | (Warning) New radar message intervals may not overlap existing intervals. |
| Resolution: | Ensure new interval does not overlap existing intervals and re-attempt. |
| Message: | System cmd is read-only |
| Description: | (Warning) Cannot modify a read-only system command. |
| Resolution: | n/a |
| Message: | System cmd is read-only |
| Description: | Can't remove a read-only system command. |
| Resolution: | n/a |
| Message: | Target [name] does not exist |
| Description: | (Warning) Cannot delete/modify a target that doesn't exist. |
| Resolution: | Input inconsistency - reattempt; note circumstances and contact support if problem persists. |
| Message: | [OS error description] |
| Description: | (Warning) The OS could not perform the requested directory/file operation. |
| Resolution: | Consult OS documentation for resolution of the OS error. |
| Message: | Error Saving display [viewer name]: Error opening [weather file] |
| Description: | The specified weather file cannot be written to. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Error Saving display [viewer name]: Saving has been disabled. |
| Description: | This application does not support saving display values. |
| Resolution: | Contact support. |
| Message: | Failed to create [filename]: [OS error description] |
| Description: | The specified filename could not be written. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to create achar.xml: [OS error description] |
| Description: | I/O error attempting to write the aircraft characteristics file. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to create pilotPositions.xml: [OS error description] |
| Description: | I/O error attempting to write the pilot postions file. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to create prefs.xml: [OS error description] |
| Description: | I/O error attempting to write the scenario preferences file. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to create prompts.xml: [OS error description] |
| Description: | I/O error attempting to write the prompts file. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to create rsi.xml: [OS error description] |
| Description: | I/O error attempting to write the RSI file. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to create scenario.xml: [OS error description] |
| Description: | I/O error attempting to write the scenario file. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to create syscmds.xml: [OS error description] |
| Description: | I/O error attempting to write the system commands file. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to create tgts.xml: [OS error description] |
| Description: | I/O error attempting to write the targets file. |
| Resolution: | Check user, directory, and file permissions; check disk capacity; consult OS documentation. |
| Message: | Failed to eject |
| Description: | CD could not be ejected. |
| Resolution: | Manually eject the CD. |
| Message: | Permission Denied. |
| Description: | User does not have permission to create the new directory that was requested. |
| Resolution: | Check user, directory, and file permissions. |
| Message: | Process Failed: [OS error description] |
| Description: | An error occurred attempting to launch a separate process to perform the requested action. |
| Resolution: | Check system health, memory, paging, etc. Consult OS documentation for details on the specific OS error. Reboot processor. Contact support if problem persists. |
| Message: | QRadar::save - invalid Type value [radar type] |
| Description: | A radar with an invalid type cannot be saved. |
| Resolution: | Examine radar type using scenario editor, select new type from dropdown selector if necessary, and re-save. |
| Message: | [filename] does not exist |
| Description: | Display file specified in scenario config does not exist. |
| Resolution: | Determine whether the specified file has been moved or deleted. Restore from backup if possible. |
| Message: | Config file [filename] not found. |
| Description: | The specified config file does not exist or is not accessible. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | Error decoding tangent pt [point] |
| Description: | The specified tangent pt could not be resolved to lat/long coordinates. |
| Resolution: | Config file may be damaged or corrupt. Restore from backup if possible. |
| Message: | Error parseing config file: [error message] |
| Description: | Invalid XML detected in scenario config file. |
| Resolution: | Examine scenario.xml file and correct errors, or create new scenario. |
| Message: | No display file specified in config file. |
| Description: | Display file could not be determined while processing the scenario config file. |
| Resolution: | Check whether latest version of the application is being run. |
| Message: | No file specified in achar config line |
| Description: | Scenario config file does not reference a valid aircraft characteristics file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | No file specified in adaptation config line |
| Description: | Scenario config file does not reference a valid adaptation file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Adaptation may not be installed properly. |
| Message: | No file specified in pilotPositions config line |
| Description: | Scenario config file does not reference a valid pilot positions file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | No file specified in prefs config line |
| Description: | Scenario config file does not reference a valid scenario preferences file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | No file specified in prompts config line |
| Description: | Scenario config file does not reference a valid prompts file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | No file specified in rsi config line |
| Description: | Scenario config file does not reference a valid RSI file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | No file specified in syscmds config line |
| Description: | Scenario config file does not reference a valid system commands file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | No file specified in tgts config line |
| Description: | Scenario config file does not reference a valid targets file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | No processor group info found for sector [sector id] |
| Description: | A sector is defined without a processor group (equipment) assigned to it. |
| Resolution: | Edit the adaptation files. |
| Message: | No tangent specified for display |
| Description: | Scenario config file does not specify a value for display tangent. |
| Resolution: | Config file may be damaged or corrupt. Restore from backup if possible. |
| Message: | parseDisplay error: invalid llgrid parameters |
| Description: | Scenario config file contains invalid or incomplete lat/long grid parameters. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | parseDisplay error: no adaptation name specified |
| Description: | Scenario config file does not specify the adaptation name. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | parseDisplay error: no binmap file specified |
| Description: | Scenario config file contains incomplete binary map file information. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | parseDisplay error: no dbmap file specified |
| Description: | Scenario config file contains incomplete DB map file information. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | parseDisplay error: no map file specified |
| Description: | Scenario config file contains incomplete map file information. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | parseDisplay error: no noaamap file specified |
| Description: | Scenario config file contains incomplete NOAA map file information. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | parseDisplay error: no wx file specified |
| Description: | Scenario config file contains partial weather information but does not specify a weather file. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | Scenario open error: couldn't change directory to [directory] |
| Description: | The specified directory does not exist or is not accessible. |
| Resolution: | Check user, directory, and file-permissions. |
| Message: | Scenario open error: couldn't find valid scenario config file |
| Description: | The scenario cannot be opened because the necessary config file(s) do not exist or are not accessible. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | wx: no directory specified |
| Description: | Scenario config file does not reference a valid directory for weather. |
| Resolution: | Scenario data may be invalid, out-of-date, or corrupt. Create new scenario or restore scenario from backup if possible. |
| Message: | [new scenario directory] [OS error description] |
| Description: | An error occurred attempting to create the specified scenario directory. |
| Resolution: | Check disk capacity, user, file, and directory permissions. See OS documentation for OS error details. |
| Message: | [OS error description] |
| Description: | An error was returned by the OS when attempting a file operation (copy, rename, delete). |
| Resolution: | See OS documentation. |
| Message: | Cannot Move files to CDROM |
| Description: | Scenario(s) should only be copied to CDROM, moving them to CDROM is not allowed. |
| Resolution: | Copy instead of move. |
| Message: | Deletion Failed |
| Description: | Scenario could not be deleted by the scenario manager. |
| Resolution: | Check user, directory, and file-permissions. |
| Message: | Failed to copy scenario ! |
| Description: | An error occurred attempting to copy or move the scenario. Details may be available by clicking the 'Details' button. |
| Resolution: | Examine details for the nature of the error. Copy manually. |
| Message: | Failed to create process |
| Description: | An error occurred attempting to launch a process to archive the scenario to USB device. |
| Resolution: | Check that USB device is attatched and functioning properly. Check processor health. |
| Message: | Failed to set permissions on "[new scenario directory]" |
| Description: | New scenario directory could not be assigned the appropriate file-permissions after it was created. |
| Resolution: | Ensure user running application has sufficient authority for this action. |
| Message: | Failed to start cd recording process. |
| Description: | A problem occurred attempting to access the CD drive for recording. |
| Resolution: | Ensure CD drive is functioning properly; re-attempt. Ensure valid CD is present in drive. |
| Message: | Failed to start copy process |
| Description: | An error occurred attempting to launch a process to copy the scenario. |
| Resolution: | Check processor health (memory, CPU, users, paging). Restart application or reboot processor as necessary. |
| Message: | Permission Denied |
| Description: | User attempted to copy/move/delete a scenario from/to a directory where user process does not have write permission. |
| Resolution: | Check and correct user, file, and directory permissions. |
| Message: | Process one : [error details for input process] Process two : [error details for output process] |
| Description: | Details may be available for input/output processes for certain scenario manager errors. |
| Resolution: | Record details for advanced troubleshooting/problem resolution. |
| Message: | This scenario is too large to fit on a CD. |
| Description: | self-explanatory |
| Resolution: | Copy to fixed or network disk instead. Manually compress/tar scenario files to one or more CDs. |
| Message: | [aircraft characteristic] is read only |
| Description: | Aircraft characteristic data is read only. |
| Resolution: | Adapted aircraft cannot be modified by an import. |
| Message: | [target name] Failed: achar [aircraft name] does not exist in scenario |
| Description: | The specified aircraft characteristics record was not found in the scenario. |
| Resolution: | Correct error in import scenario. |
| Message: | [target name] Failed: pilot position [position name] does not exist in scenario |
| Description: | An unknown pilot position was specified in the import file. |
| Resolution: | Correct error in import scenario. |
| Message: | [target name]'s achar [aircraft name] failed to import |
| Description: | The specified aircraft characteristics record was not found in scenario and could not be added. |
| Resolution: | Add record manually, or correct in import scenario. |
| Message: | [target name]'s pilot position [position name] failed to import |
| Description: | An unknown pilot position was specified in the import file, but could not be added to the scenario. |
| Resolution: | Correct error in import scenario. |
| Message: | Adaptation ([name]) invalid. Msg Failed: [message text] |
| Description: | Adaptation for a system command being imported was invalid - system message will not be imported. |
| Resolution: | Correct error in import scenario or add message manually. |
| Message: | Adaptation ([name]) invalid: Msg: ([text]) ignored |
| Description: | (Warning) The import scenario contained a target message that referenced an invalid adaptation. |
| Resolution: | Correct error(s) in import scenario. |
| Message: | Duplicate achar name [achar name] not allowed. |
| Description: | An aircraft characteristic with the same name already exists. Cannot create duplicate achars. |
| Resolution: | Ignore the error (since the aircraft exists), or modify/remove the duplicate aircraft from import or working scenario. |
| Message: | Duplicate AChar name [aircraft] |
| Description: | (Warning) An attempt was made to add a duplicate aircraft while importing a scenario. |
| Resolution: | Ignore warning, or remove/modify the duplicate entry from import or working scenario. |
| Message: | Duplicate rsi description [description text] |
| Description: | (Warning) An attempt was made to add an RSI with the same description as an existing RSI during scenario import. |
| Resolution: | Resolve RSI duplicates in import and working scenarios and re-attempt. |
| Message: | Duplicate rsi value [ID] |
| Description: | (Warning) An attempt to add an RSI with the same numeric ID as an existing RSI during scenario import. |
| Resolution: | Resolve RSI duplicates in import and working scenarios and re-attempt. |
| Message: | Equipment ([name]) invalid. Msg Failed: [message text] |
| Description: | A system command being imported referenced unknown equipment for this scenario. |
| Resolution: | Correct error(s) in import scenario. |
| Message: | Equipment ([name]) invalid: Msg: ([text]) ignored |
| Description: | (Warning) The scenario being imported contains a message that references an invalid equipment name. |
| Resolution: | Correct error(s) in import scenario. |
| Message: | Error adding RSI [tag description] |
| Description: | An RSI with the specified description text could not be added while importing the GSGT scenario. |
| Resolution: | Attempt to open import scenario directly, correct errors, retry the import. |
| Message: | Error creating route for [target]: [CREATE ROUTE error]. Setting route to 0.... |
| Description: | (Warning) An error occurred attempting to add the route for the specified target during scenario import. |
| Resolution: | Correct error(s) in import scenario. |
| Message: | Rsi [identifier] does not have a description |
| Description: | (Warning) An attempt was made to add an RSI with no description to the scenario during import. |
| Resolution: | Ignore warning, or manually correct the error in the import or working scenario. |
| Message: | Rsi not populated |
| Description: | An attempt was made to add a null RSI to the scenario during import. |
| Resolution: | Import scenario data may be invalid or corrupt. Examine and correct errors in import scenario. |
| Message: | Rsi value [ID] out of range |
| Description: | (Warning) An attempt was made to add an RSI with an out of range numeric ID during scenario import. |
| Resolution: | Import scenario data may be invalid or corrupt. Examine and correct errors in import scenario. |
| Message: | Setting sector [ID] to LIVE mode (for PilotPosition [position name]) |
| Description: | (Warning) A sector that was not LIVE in the current scenario is being set to LIVE by the import. |
| Resolution: | Reset mode in working scenario if desired. |
| Message: | Tried to add null Aircraft Characteristic |
| Description: | Importing the scenario caused an attempt to add a null aircraft to the scenario. |
| Resolution: | Import scenario data may be invalid or corrupt. Examine and correct errors in import scenario. |
| Message: | [OS error description] |
| Description: | (Warning) The OS could not perform the requested directory/file operation. |
| Resolution: | Consult OS documentation for details on the specific error. |
| Message: | [target name] error adding [event]: Can't add heading change events to [target name]: target has a route |
| Description: | Invalid saved scenario data - heading change events cannot be added for a target with a route. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | [target name] error adding [event]: No condition specified |
| Description: | Saved scenario data specifies a target event with no condition. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | [target name] error adding [event]: Tgtevent position [name] not found in target route |
| Description: | Invalid saved scenario data - the specified position cannot be found in the target route. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | [target name] error adding [event]: Tgtevent position [name] specified on target with no route |
| Description: | Invalid saved scenario data - an event for a specific position cannot be added for a target with no route. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | [target name] error adding [event]: Tgtevent time [time] is earlier than target starttime |
| Description: | An invalid time was specified for a target event in saved scenario data - target event cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | [target name] error adding [event]: Unknown tgt event type "[value]" |
| Description: | Saved scenario data specifies an unknown target event. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | [target name] flevel changed from [altitude] to [altitude] |
| Description: | (Warning) Altitude was adjusted for the target as indicated. |
| Resolution: | Saved scenario contained invalid data: save, re-open, and note whether problem persists. |
| Message: | [target name]: unrecognized line [tag name] |
| Description: | A line in the targets file was not recognized. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | AChar [aircraft name] not found, added to scenario. |
| Description: | (Warning) Aircraft characteristics record for the specified aircraft was added. |
| Resolution: | n/a |
| Message: | Adaptation and Aces hostname mismatch: adaptation is [host name], aces is [host name] |
| Description: | Adaptation XML and ACES files specify different values for host name. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | ALTSTR table not found. |
| Description: | ACES file does not contain an ALTSTR table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Block [number] error. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Couldn't change working directory to [scenario directory]: [OS error description] |
| Description: | (Warning) An error occurred attempting to change to the specified scenario directory. |
| Resolution: | Check user, directory, and file-permissions. Consult OS documentation. |
| Message: | Couldn't create scenario [directory]: [OS error description] |
| Description: | (Warning) An error occurred attempting to create a new scenario directory. |
| Resolution: | Check disk capacity, user, directory, and file-permissions. Consult OS documentation. |
| Message: | Couldn't determine tangent info from file. |
| Description: | Tangent information not specified in ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Directory [name] does not exist. |
| Description: | The adaptation directory does not exist or cannot be accessed. |
| Resolution: | Ensure directory exists, and that user, directory, and file-permissions are appropriate. |
| Message: | Duplicate AChar name [aircraft] |
| Description: | (Warning) duplicate aircraft record cannot be added. |
| Resolution: | Saved scenario data may have contained duplicate aircraft records. Save and re-open scenario. |
| Message: | Duplicate Pilot Position name [position] |
| Description: | (Warning) duplicate pilot positions will not be added to scenario. |
| Resolution: | n/a - warning only |
| Message: | Duplicate rsi description [description] |
| Description: | (Warning) Scenario import data specifies more than one RSI with the same description. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Duplicate rsi value [identifier] |
| Description: | (Warning) Scenario import data specifies more than one RSI with the same identifier. |
| Resolution: | Duplicates are not imported: save and re-open scenario, if problem persists contact support. |
| Message: | EOF reading bds. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | EOF reading block [number] |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | EOF reading bms. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | EOF reading es. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | EOF reading gds. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | EOF reading pds. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding msg ([message content]) to target [name]: Invalid host/device [host]/[device] |
| Description: | An unknown device was specified for a message in saved scenario data - message cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error adding msg ([message content]) to target [name]: Invalid msg time |
| Description: | An invalid time was specified for a message in saved scenario data - message cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error adding msg ([message content]) to target [name]: No device specified |
| Description: | No device was specified for a message in saved scenario data - message cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error adding msg ([message content]) to target [name]: No time specified |
| Description: | No time was specified for a message in saved scenario data - message cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error adding msg ([message content]) to target [name]: Unknown adaptation [host name] |
| Description: | An unknown host name was specified for a message in saved scenario data - message cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error adding pilot position: No name specified |
| Description: | Pilot position data specifies a position with a null name. |
| Resolution: | Saved scenario may be corrupted: restore from backup or create new scenario. |
| Message: | Error adding pre programmed event ([event]): Invalid preprogevent time |
| Description: | Saved scenario data contains a preprogrammed event with an invalid time. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding pre programmed event ([event]): No time specified |
| Description: | Saved scenario data contains a preprogrammed event with no time. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding prompt ([prompt]): Invalid prompt time |
| Description: | Scenario prompts input file contains prompt with an invalid time. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding prompt ([prompt]): No address specified |
| Description: | Scenario prompts input file contains a prompt with no address. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding prompt ([prompt]): No time specified |
| Description: | Scenario prompts input file contains prompt where no time is specified. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding site definition ([site name]): Adaptation [name] does not exist in scenario |
| Description: | Scenario file contains a site definition that specifies an unknown adaptation. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding site definition ([site name]): No Adaptation specified |
| Description: | Scenario file contains a partial site definition but no adaptation is specified. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding static message for [radar name] |
| Description: | Static message could not be added for the specified radar. |
| Resolution: | Check for missing messages for specified radar, make additions/corrections, save/re-save scenario. |
| Message: | Error adding syscmd ([command]): Invalid host/device [host]/[device] |
| Description: | Saved scenario data contains a system command that references an unknown device. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding syscmd ([command]): Invalid msg time |
| Description: | Saved scenario data contains a system command with an invalid time. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding syscmd ([command]): No device specified |
| Description: | Saved scenario data contains a system command where no device is specified. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding syscmd ([command]): No time specified |
| Description: | Saved scenario data contains a system command with no time specified. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding syscmd ([command]): Unknown adaptation [name] |
| Description: | Saved scenario data contains a system command that references an unknown adaptation. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error adding target [name]: [error message] |
| Description: | A problem occurred while attempting to 'load' the specified target into the scenario. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error adding time interval to static message for radar [name] : Cannot have multiple time intervals without a Stop time. ([start time] - None) already exists. |
| Description: | Scenario data contains overlapping static message time intervals. |
| Resolution: | Check scenario for missing static radar messages or missing intervals, add as necessary, and save/re-save scenario. Re-open scenario - no errors should occur. |
| Message: | Error adding time interval to static message for radar [name] : New interval ([start time] - [stop time]) overlaps another interval ([start time] - [stop time]). |
| Description: | Scenario data contains overlapping static message time intervals. |
| Resolution: | Check scenario for missing static radar messages or missing intervals, add as necessary, and save/re-save scenario. Re-open scenario - error should not recur. |
| Message: | Error adding time interval to static message for radar [name] : Only the last interval can be without a Stop time. |
| Description: | Scenario data contains overlapping static message time intervals. |
| Resolution: | Check scenario for missing static radar messages or missing intervals, add as necessary, and save/re-save scenario. Re-open scenario - error should not recur. |
| Message: | Error adding time interval to static message for radar [name] : Start time ([time]) occurs during another interval ([start time] - [stop time]). |
| Description: | Scenario data contains overlapping static message time intervals. |
| Resolution: | Check scenario for missing static radar messages or missing intervals, add as necessary, and save/re-save scenario. Re-open scenario - error should not recur. |
| Message: | Error adding time interval to static message for radar [name] : Start time ([time]) occurs during another interval without a Stop time ([time] - None). |
| Description: | Scenario data contains overlapping static message time intervals. |
| Resolution: | Check scenario for missing static radar messages or missing intervals, add as necessary, and save/re-save scenario. Re-open scenario - error should not recur. |
| Message: | Error adding time interval to static message for radar [name] : Stop time ([time]) occurs during another interval ([start time] - [stop time]). |
| Description: | Scenario data contains overlapping static message time intervals. |
| Resolution: | Check scenario for missing static radar messages or missing intervals, add as necessary, and save/re-save scenario. Re-open scenario - error should not recur. |
| Message: | Error creating target [name]: [CREATE ROUTE error] |
| Description: | An invalid route was specified for a target in saved scenario data - target cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error creating target [name]: [target] flevel adjusted from [altitude] to [altitude] |
| Description: | (Warning) An aircraft type was specified for a target in saved scenario data - target cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error creating target [name]: Invalid achar [aircraft type] |
| Description: | An aircraft type was specified for a target in saved scenario data - target cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error creating target [name]: Invalid start time |
| Description: | An invalid start time was specified for a target in saved scenario data - target cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error creating target [name]: No target name specified |
| Description: | No name was specified for a target in saved scenario data - target cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error creating target [name]: No time specified |
| Description: | No time was specified for a target in saved scenario data - target cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error decoding position [position] |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error decoding tangent [tangent value] |
| Description: | Specified tangent value is invalid in ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Error finding static message [radar name] for [radar name] |
| Description: | Error locating static message by adapted index. |
| Resolution: | Check for missing messages for specified radar, make additions/corrections, save/re-save scenario. |
| Message: | Error initializing static message [radar name] for [radar name] |
| Description: | Static message could not be initialized for the specified radar. |
| Resolution: | Check for missing messages for specified radar, make additions/corrections, save/re-save scenario. |
| Message: | Error opening [filename]: [error message] |
| Description: | An error occurred opening the specified file. |
| Resolution: | Ensure specified file exists and user (application) has sufficient permission to access. |
| Message: | Error opening grib file [filename]: [error message] |
| Description: | The specified file could not be opened. |
| Resolution: | Ensure specified file exists; check user, directory, and file-permissions. |
| Message: | Error parsing [filename]. |
| Description: | An error was encountered while parsing the specified adaptation file. |
| Resolution: | EADP data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Error parsing [filename]: Unknown FIX_RECORD field [name] |
| Description: | An unknown element was encountered within a fix record. |
| Resolution: | EADP data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Error parsing [filename]: Unknown FixType [type] record, Fix [name]. |
| Description: | EADP product contains an unknown fix type for the specified fix. |
| Resolution: | EADP data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Error parsing achar file [filename]. |
| Description: | An error occurred while parsing the specified aircraft characteristics file. |
| Resolution: | Scenario or adaptation data may be corrupted: restore from backup or create new scenario. |
| Message: | Error parsing adaptation file [filename]. |
| Description: | An error occurred while parsing adaptation - the scenario cannot be opened/created. |
| Resolution: | Check user, directory, and file-permissions for adaptation data. Make sure specified file exists. |
| Message: | Error parsing pilot position file [filename] |
| Description: | An error occurred while parsing the specified pilot positions file. |
| Resolution: | Saved scenario may be corrupted: overwrite, restore from backup or create new scenario. |
| Message: | Error parsing precip file [filename], pass 2: Error determining parameters for [filename]. ignoring. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error parsing preferences file [filename]. |
| Description: | An error occurred while parsing the specified preferences file. |
| Resolution: | Saved scenario may be corrupted: overwrite, restore from backup or create new scenario. |
| Message: | Error parsing prompt file [filename]. |
| Description: | An error occurred while processing the specified scenario input file. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error parsing ruc file [filename], ignoring. |
| Description: | RUC file contains improperly formed XML. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error parsing site definition file [filename]. |
| Description: | An error occurred while processing the specified scenario input file. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error parsing syscmds file [filename] |
| Description: | System commands scenario file could was not processed successfully. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error parsing target file [filename]. |
| Description: | An error occurred while parsing the specified scenario file. |
| Resolution: | Saved scenario may be corrupted: overwrite, restore from backup or create new scenario. |
| Message: | Error parsing target file [filename]. |
| Description: | Saved scenario data contains invalid target data. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error parsing wx file [filename]: [error message]. (line [number], col [number]) |
| Description: | Weather file contains improperly formed XML. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error processing [target name] route ([route]): [CREATE ROUTE error] |
| Description: | Saved scenario data contains a target with an invalid route. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error processing [target] dynamics: unknown achar [aircraft type] |
| Description: | Invalid dynamics were specified for a target in saved scenario data - target cannot be added. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Error reading bds (tried to read [decimal value] ([hex value]) bytes, read [decimal value] bytes |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error reading bms. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error reading es. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error reading gds. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error reading is: GRIB identifier invalid. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Error reading pds. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | ERROR: [path] directory does not exist! Do you want to create it? |
| Description: | (Warning) self-explanatory |
| Resolution: | Allow application to create directory or cancel and specify new location. |
| Message: | Failed to eject |
| Description: | CD could not be ejected. |
| Resolution: | Manually eject CD. |
| Message: | FPA [FPA ID], unknown fix [fix] |
| Description: | FPA table of ACES file referenced an unknown fix as part of an FPA definition. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | FPA [FPA ID], unknown major away [airway] |
| Description: | FPA table of ACES file referenced an unknown major airway as part of an FPA definition. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal achr option [option] ([token]). |
| Description: | An illegal option was specified in the ACHR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal adjcp option [option] ([token]). |
| Description: | An illegal option was specified in the ADJCP table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal adjfr option [option] ([token]) |
| Description: | An illegal option was specified in the ADJFR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal arpt option [option] ([token]), arpt [airport]. |
| Description: | An illegal option was specified in the ARPT table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal away option [option] ([token]), away [airway]. |
| Description: | An illegal option was specified in the AWAY table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal away state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the AWAY table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal crte option [option] ([token]), crte [route name] |
| Description: | An illegal option was specified in the CRTE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal crte state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the CRTE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal dirte option [option] ([token]), dirte [direct route]. |
| Description: | An illegal option was specified in the DIRTE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal dirte state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the DIRTE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal fix option [option] ([token]). |
| Description: | An illegal option was specified in the FIX table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal fpa option [option] ([token]), while processing fpa [FPA ID]. |
| Description: | An illegal option was specified in the FPA table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal gmlmap option [option] ([token]), away [airway]. |
| Description: | An illegal option was specified in the GMLMAP table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal gmlmap state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the GMLMAP table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal gmlsda option [option] ([token]). |
| Description: | An illegal option was specified in the GMLSDA table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal gmlsda state [option], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the GMLSDA table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal gmssda option [option] ([token]). |
| Description: | An illegal option was specified in the GMSSDA table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal gmssda state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the GMSSDA table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal imer option [option] ([token]). |
| Description: | An illegal option was specified in the IMER table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal lciot option [option] ([token]). |
| Description: | An illegal option was specified in the LCIOT table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal ldn option [option] ([token]). |
| Description: | An illegal option was specified in the LDN table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal node option [option] ([token]). |
| Description: | An illegal option was specified in the NODE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal node state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the NODE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal par option [option] ([token]), par [route name] |
| Description: | An illegal option was specified in the PAR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal par state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the PAR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal parts option [option] ([token]). |
| Description: | An illegal option was specified in the PARTS table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal pdar option [option] ([token]), pdar [route name]. |
| Description: | An illegal option was specified in the PDAR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal pdar state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the PDAR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal pdr option [option] ([token]), pdr [route name]. |
| Description: | An illegal option was specified in the PDR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal pdr state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the PDR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal pram option [option] ([token]). |
| Description: | An illegal option was specified in the PRAM table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal rsb option [option] ([token]). |
| Description: | An illegal option was specified in the RSB table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal rsite option [option] ([token]). |
| Description: | An illegal option was specified in the RSITE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal secr option [option] ([token]). |
| Description: | An illegal option was specified in the SECR table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal sidrte option [option] ([token]), sid [SID name]. |
| Description: | An illegal option was specified in the SIDRTE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal sidrte state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the SIDRTE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal splan option [option] ([token]). |
| Description: | An illegal option was specified in the SPLAN table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal starte option [option] ([token]), star [STAR name]. |
| Description: | An illegal option was specified in the STARTE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal starte state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the STARTE table of the ACES file |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal stereog option [option] [token] |
| Description: | An illegal option was specified in the STEREOG table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal subfx option [option] ([token]). |
| Description: | An illegal option was specified in the SUBFX table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal subfx state [state], while processing arg [token]. |
| Description: | An illegal state was encountered while processing the SUBFX table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Illegal tline option [option] ([token]). |
| Description: | An illegal option was specified in the TLINE table of the ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Invalid aces file pathname [path/filename] |
| Description: | The specified path and filename cannot be resolved to locate a valid ACES file. |
| Resolution: | Ensure specified file exists and user (application) has sufficient permission to access. |
| Message: | Invalid achar file [filename] |
| Description: | The specified aircraft characteristics file does not exist or cannot be accessed. |
| Resolution: | Scenario data may be corrupted: restore from backup or create new scenario. |
| Message: | Invalid adaptation file [filename] |
| Description: | Adaptation file specified in the request to open/create a scenario does not exist. |
| Resolution: | Ensure adaptation data is in the expected location; check file-permissions. |
| Message: | Invalid projection type [projection type] |
| Description: | ACES file specified an invalid projection type. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Layer [number] error. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Local host not found. |
| Description: | Local host facility identification was not specified in ACES file. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | No achar files specified |
| Description: | Scenario configuration files do not include the location of ACHAR data. |
| Resolution: | Scenario configuration may be corrupted: restore from backup or create new scenario. |
| Message: | No adaptation files specified |
| Description: | No adaptation file specified in the request to open/create a scenario. |
| Resolution: | Specify an adaptation and re-attempt. |
| Message: | No Strata found. |
| Description: | ACES ALTSTR table does not contain any altitude strata. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Permission Denied. |
| Description: | User does not have permission to create the new directory that was requested. |
| Resolution: | Create scenario in location where user does have permission or modify user permission. |
| Message: | Process Failed: [OS error description] |
| Description: | An error occurred attempting to launch a separate process to perform the requested action. |
| Resolution: | Check system health, memory, paging, etc. Reboot processor. Consult OS documentation for details on the specific OS error. Contact support if problem persists. |
| Message: | Radar [site name] not found. |
| Description: | ACES RSITE table specifies an unknown radar site. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Rsi [identifier] does not have a description |
| Description: | (Warning) Scenario import data specifies an RSI with no description. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Rsi not populated |
| Description: | Scenario import files specify null RSI. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Rsi value [value] out of range |
| Description: | (Warning) Scenario import data specifies an out of range value for an RSI. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Table ACHR not found. |
| Description: | ACES file does not contain ACHR table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table ADJFR not found. |
| Description: | ACES file does not contain ADJFR table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table ARPT not found. |
| Description: | ACES file does not contain an ARPT table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table AWAY not found. |
| Description: | ACES file does not contain an AWAY table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table CRTE not found. |
| Description: | ACES file does not contain a CRTE table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table DIRTE not found. |
| Description: | ACES file does not contain a DIRTE table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table FIX not found. |
| Description: | ACES file does not contain a FIX table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table FPA not found. |
| Description: | ACES file does not contain an FPA table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table GMLMAP not found. |
| Description: | ACES file does not contain GMLMAP table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table GMLSDA not found. |
| Description: | ACES file does not contain GMLSDA table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table GMSSDA not found. |
| Description: | ACES file does not contain GMSSDA table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table IMER not found. |
| Description: | ACES file does not contain IMER table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table LCIOT not found. |
| Description: | ACES file does not contain LCIOT table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table LDN not found. |
| Description: | ACES file does not contain LDN table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table NODE not found. |
| Description: | ACES file does not contain a NODE table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table PAR not found. |
| Description: | ACES file does not contain a PAR table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table PARTS not found. |
| Description: | ACES file does not contain PARTS table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table PDAR not found. |
| Description: | ACES file does not contain a PDAR table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table PDR not found. |
| Description: | ACES file does not contain a PDR table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table PRAM not found. |
| Description: | ACES file does not contain PRAM table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table RSB not found. |
| Description: | ACES file does not contain an RSB table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table RSITE not found. |
| Description: | ACES file does not contain RSITE table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table SECR not found. |
| Description: | ACES file does not contain SECR table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table SIDRTE not found. |
| Description: | ACES table does not contain a SIDRTE table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table SPLAN not found. |
| Description: | ACES file does not contain SPLAN table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table STARTE not found. |
| Description: | ACES file does not contain a STARTE table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table STEREOG not found. |
| Description: | ACES file does not include a STEREOG table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table SUBFX not found. |
| Description: | ACES file does not contain a SUBFX table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Table TLINE not found. |
| Description: | ACES file does not contain a TLINE table. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Target [name]: Invalid pilot frequency [frequency] |
| Description: | (Warning) Saved scenario data specifies an invalid frequency - pilot frequency will be set for the target. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Target [name]: No name specified for pilot position |
| Description: | (Warning) Saved scenario data specifies a pilot position with no name - pilot position will not be set for the target. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | Target [name]: Unknown pilot position [name] specified. |
| Description: | (Warning) Saved scenario data specifies an unknown pilot position name - pilot position will not be set for the target. |
| Resolution: | Saved scenario contains invalid data: overwrite, restore from backup or create new scenario. |
| Message: | The selected scenario was created by GSGT version [number]. GSGT will convert the scenario to version [number]. |
| Description: | (Information) self-explanatory |
| Resolution: | n/a |
| Message: | The selected scenario was created by GSGT version [number]. Loading scenarios newer than the current GSGT version ([number]) may produce unexpected results. |
| Description: | (Warning) self-explanatory |
| Resolution: | Exit and re-run newer version of application. |
| Message: | Tried to add null Aircraft Characteristic |
| Description: | ACHAR data processing resulted in null aircraft characteristic item. |
| Resolution: | Saved scenario or adaptation data may be corrupted: restore from backup or create new scenario. |
| Message: | Tried to add null Pilot Position |
| Description: | Attempted to add a null pilot position - this condition is normally caught when parsing the null data. |
| Resolution: | Saved scenario may be corrupted: overwrite, restore from backup or create new scenario. |
| Message: | Unknown gridName [name] |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Unknown Map type: [type] |
| Description: | Scenario config specified that a map of an unknown type be loaded. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Unknown pref route [token] specified in tline [name]. |
| Description: | TLINE definition specified an unknown preferred routing. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Unknown transition fix [token] specified in tline [name]. |
| Description: | TLINE definition specified an unknown transition fix. |
| Resolution: | ACES data is incomplete, invalid or corrupt. Restore from source or backup if possible. |
| Message: | Wx file: nexrad line has no file attribute. Ignoring. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Wx file: precip line missing required attribute(s). Ignoring. |
| Description: | A problem occurred importing weather. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | Wx file: ruc line has no file attribute. Ignoring. |
| Description: | Saved scenario data does not specify location of RUC weather data. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new scenario. |
| Message: | bad device [device] |
| Description: | Invalid device specified in export request. |
| Resolution: | Check device - respecify a valid export device. |
| Message: | Error creating "[directory]" : [OS error description] |
| Description: | An error occurred creating the specified directory for the SDRR scenario. |
| Resolution: | Check disk capacity and user permissions. |
| Message: | error opening [filename] : [OS error description] |
| Description: | An error occurred creating the specified filename for the SDRR scenario. |
| Resolution: | Check user, directory and file permissions. |
| Message: | Error opening [filename] : [OS error description] |
| Description: | Could not open the specified SDRR file. |
| Resolution: | Ensure file exists at the specified location. Check user, directory and file permissions. |
| Message: | Error opening [filename] |
| Description: | Could not open the specified SDRR file. |
| Resolution: | Ensure file exists at the specified location. Check user, directory and file permissions. |
| Message: | Error opening [tape device] : [OS error description] |
| Description: | An error occurred attempting to open tape device during SDRR export. |
| Resolution: | Ensure tape is present, mounted and has valid label. Re-attempt on different tape device. |
| Message: | Error parsing sdrr.xml |
| Description: | An error occurred while parsing one of the SDRR scenario files created during export. |
| Resolution: | Intermediate product of export invalid or corrupt: check disk integrity, reattempt. |
| Message: | Error removing "[directory]" : [OS error description] |
| Description: | An error occurred removing the previous SDRR scenario directory. |
| Resolution: | Check file permissions and make sure directory is not in use. |
| Message: | no valid input found: no sdrr.xml in current directory, and no -d option. |
| Description: | Cannot create non-radar merge tape without exported SDRR scenario files. |
| Resolution: | Save scenario, exit application, restart and load scenario and re-attempt export. Contact support if problem persists. |
| Message: | OPERATION ABORTED. |
| Description: | User cancelled the generation of an export before it was finished. |
| Resolution: | n/a |
| Message: | Failed to run : [job and error information] |
| Description: | The requested job did not run successfully - job details/progress are listed. |
| Resolution: | Correct errors and re-attempt. |
| Message: | No setting for jobshop exectuable |
| Description: | The setting that specifies the location of the 'Job Shop' executable is blank. |
| Resolution: | Re-install or configure application; contact support if problem persists. |
| Message: | Password field empty. |
| Description: | Must specify password to connect to the job shop. |
| Resolution: | Specify valid user ID and password. |
| Message: | Reference field empty. |
| Description: | The reference field is needed to identify this job on the host, and cannot be empty. |
| Resolution: | Specify reference and re-attempt. |
| Message: | User ID field empty. |
| Description: | User ID must be specified to connect to the job shop. |
| Resolution: | Specify valid user ID and password. |
| Message: | ACModel file [filename] exists. overwriting... |
| Description: | (Warning) Overwriting the specified file. |
| Resolution: | n/a |
| Message: | Could not determine release name |
| Description: | Adaptation release (chart date) must be provided to perform an SIME export. |
| Resolution: | Ensure adaptation is installed properly. |
| Message: | Error assigning equipment: [linebreak] error assigning [equipment name]: [reason] ... |
| Description: | (Warning) A problem occurred attempting to make the equipment assignments specified in the SIME export dialog. |
| Resolution: | Check equipment assignments in export dialog and re-attempt. |
| Message: | Error creating directory "[directory]". Aborting. |
| Description: | Could not create the specified directory during SIME export. |
| Resolution: | Check user and directory permissions. Check disk capacity. |
| Message: | Error creating export structure in directory "[directory]". Aborting. |
| Description: | Could not create the specified directory under which SIME export files will be stored. |
| Resolution: | Check user and directory permissions. Check disk capacity. |
| Message: | Error creating wx scenario file. |
| Description: | An error occurred attempting to create the weather scenario file during SIME export. |
| Resolution: | Check user and directory permissions. Check disk capacity. |
| Message: | Error Opening [control filename]: [OS error description] |
| Description: | (Warning) The specified SIME control file could not be created/opened. |
| Resolution: | Check user and directory permissions. Check disk capacity. |
| Message: | error opening [filename]: [OS error description] |
| Description: | Could not create the specified file during SIME export. |
| Resolution: | Check user and directory permissions. Check disk capacity. |
| Message: | Error opening ATCoach ruc file [filename] |
| Description: | Could not create the specified file during SIME export. |
| Resolution: | Check user and directory permissions. Check disk capacity. |
| Message: | Error setting permissions for directory "[directory]". Aborting. |
| Description: | Could not modify file permission for the specified directory during SIME export. |
| Resolution: | Check user and directory permissions. |
| Message: | exportATCoach, error opening outfile: [OS error description] |
| Description: | Could not create the specified file during SIME export. |
| Resolution: | Check user and directory permissions. Check disk capacity. |
| Message: | Invalid exercise number |
| Description: | (Warning) SIME export attempted to use an invalid exercise number. |
| Resolution: | Specify valid exercise number (1-16) and re-attempt. |
| Message: | Only one real position can be assigned per console |
| Description: | User attempted to assign more than one real position to a console during SIME export. |
| Resolution: | Re-assign position(s) and re-attempt. |
| Message: | OPERATION ABORTED. |
| Description: | User cancelled the generation of an export before it was finished. |
| Resolution: | n/a |
| Message: | Pilot Machine [name] does not exist. Any associated pilot positions will not be assigned |
| Description: | (Warning) Pilot positions cannot be assigned to a non-existent pilot machine. |
| Resolution: | Correct assignments in export dialog and re-attempt. |
| Message: | Slot has not been assigned |
| Description: | (Warning) During SIME export setup, an attempt was made to alter the Ops Configuration without specifying a valid slot. |
| Resolution: | Check Ops Configuration settings and re-attempt the export. |
| Message: | OPERATION ABORTED. |
| Description: | User cancelled the generation of an export before it was finished. |
| Resolution: | n/a |
| Message: | error writing to [filename]: [OS error description] |
| Description: | An error occurred while attempting to write to the specified file during TGF export. |
| Resolution: | Check user, directory, and file permissions. Check disk capacity. |
| Message: | OPERATION ABORTED. |
| Description: | User cancelled the generation of an export before it was finished. |
| Resolution: | n/a |
| Message: | [target name] is read only |
| Description: | An error occurred attempting to delete a dropped target. |
| Resolution: | Exit application, restart, load scenario and re-attempt. Contact support if problem persists. |
| Message: | CFAFThread exception caught |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error assigning output device to RSS radar [name]: [radar] error opening [surveillance device]: [OS error description] |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Attemp preview on another scenario. Ensure application is properly installed. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error assigning output device to RSS radar [name]: Error opening [file/dev name]: [OS error description] |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Attemp preview on another scenario. Ensure application is properly installed. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error assigning output device to RSS radar [name]: Illegal output format [value]. |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Attemp preview on another scenario. Ensure application is properly installed. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error creating new route [route] for [aircraft]: [CREATE ROUTE error]. Aborting snapshot of this target. |
| Description: | An error occurred attempting to delete a dropped target. |
| Resolution: | Examine target, correct any errors, and re-attempt. Save scenario, exit, and reload application. Contact support if problem persists. |
| Message: | Error creating RSS radar [name]: [radar handler name]: EOF reached on wx file |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Attemp preview on another scenario. Ensure application is properly installed. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error creating RSS radar [name]: can't determine radar type. please specify. |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Attemp preview on another scenario. Ensure application is properly installed. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error creating RSS radar [name]: Error opening [filename]: [OS error description] |
| Description: | Could not open the specified file. |
| Resolution: | Record error. Check user, directory, and file-permissions for the specified file. Ensure application is properly installed. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error creating RSS radar [name]: Invalid input format [value]. |
| Description: | Surveillance radar file contains data with an invalid format. |
| Resolution: | Record error. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error creating RSS radar [name]: wx file specified on non-SRR radar |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Attemp preview on another scenario. Ensure application is properly installed. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error creating RSS radar [name]: wx file specified with RT srv device |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Attemp preview on another scenario. Ensure application is properly installed. Restart application. Reboot. Contact support if problem persists. |
| Message: | Error deleting [target] |
| Description: | An error occurred attempting to delete a dropped target. |
| Resolution: | Examine target, correct any errors, and re-attempt. Save scenario, exit, and reload application. Contact support if problem persists. |
| Message: | Error processing [message text] |
| Description: | An error occurred while attempting to change the start time of the specified message. |
| Resolution: | Check messages for valid times, and re-attempt. Contact support if problem persists. |
| Message: | HostThread exception caught |
| Description: | An error occurred during preview processing. |
| Resolution: | Record error. Restart application. Reboot. Contact support if problem persists. |
| Message: | Received msg with error code 0x[hex value] |
| Description: | Informational message. |
| Resolution: | If message is unexpected, verify scenario content. |
| Message: | System cmd is read-only |
| Description: | An error occurred while attempting to change the start time of a system message. |
| Resolution: | Exit application, restart, load scenario and re-attempt. Contact support if problem persists. |
| Message: | [OS error description] |
| Description: | An error occurred attempting to write to a file during the generation of the report. |
| Resolution: | Check disk capacity. Check user and directory permissions. Consult OS documentation. |
| Message: | Could not Generate Target State for [target name] |
| Description: | (Warning) Report may not include data for specified target. |
| Resolution: | Check specified target characteristics for validity, correct any errors. Re-attempt. |
| Message: | Couldn't open file for writing |
| Description: | (Warning) Operation could not be completed because the target file could not be opened. |
| Resolution: | Check disk capacity. Check user and directory permissions. |
| Message: | OPERATION ABORTED. |
| Description: | User cancelled the generation of a report before it was finished. |
| Resolution: | n/a |
| Message: | *** |
| *** XML PARSE ERROR | |
| *** line == [line] column == [column] | |
| *** publicID == [ID] systemID == [ID] | |
| *** message == [message] | |
| *** | |
| Description: | Print data or file contains unexpected or invalid format. |
| Resolution: | Regenerate data to be printed and re-attempt. |
| Message: | *** |
| *** XML PARSE FATAL ERROR | |
| *** line == [line] column == [column] | |
| *** publicID == [ID] systemID == [ID] | |
| *** message == [message] | |
| *** | |
| Description: | Print data or file contains unexpected or invalid format. |
| Resolution: | Regenerate data to be printed and re-attempt. |
| Message: | *** |
| *** XML PARSE WARNING | |
| *** line == [line] column == [column] | |
| *** publicID == [ID] systemID == [ID] | |
| *** message == [message] | |
| *** | |
| Description: | Print data or file contains unexpected or invalid format. |
| Resolution: | Regenerate data to be printed and re-attempt. |
| Message: | [OS error description] |
| Description: | The OS encountered a file or print error - OS error description is displayed. |
| Resolution: | Consult OS documentation. |
| Message: | Couldn't open file for writing |
| Description: | (Warning) The requested file could not be opened for writing. |
| Resolution: | Check disk capacity/usage. Check user and directory permissions. Specify another location. |
| Message: | Error printing |
| Description: | An error occurred attempting to start the process that controls printing. |
| Resolution: | Ensure printer is properly configured, powered-on, and ready print. Check system health, reboot processor if necessary, and re-attempt. |
| Message: | ERROR: [path] directory does not exist! Do you want to create it? |
| Description: | (Warning) While attempting to print or display a log, the requested directory did not exist. |
| Resolution: | Allow application to create directory or specify new location. |
| Message: | Could not determine available GSGT software update(s). |
| Description: | Unable to determine what GSGT software updates are available on server. |
| Resolution: | Check connectivity. |
| Message: | Failed to acquire version information. |
| Description: | Unable to determine what GSGT software updates are available on server. |
| Resolution: | Check connectivity. |
| Message: | Failed to determine installed version(s). |
| Description: | GSGT is not installed, is not installed in the expected location, or installation details cannot be determined. |
| Resolution: | Install application properly then re-attempt. |
| Message: | Installation failed : [error data] |
| Description: | An error occurred during installation - error detail is provided. |
| Resolution: | Reboot processor, re-attempt installation, contact support if problem persists. |
| Message: | Installation failed : Unknown error |
| Description: | An unknown error occurred during installation. |
| Resolution: | Reboot processor, re-attempt installation, contact support if problem persists. |
| Message: | No installed versions of GSGT have been found. |
| Description: | An attempt was made to update the GSGT software without having first installed it properly. |
| Resolution: | Install application properly then re-attempt. |
| Message: | An error occurred. Please read the README file in the sqltable dir for more information. |
| Description: | An SQL error occurred attempting to access the scenario database. |
| Resolution: | Consult README file for resolution. |
| Message: | Your username or password was invalid |
| Description: | (Warning) Invalid username or password were provided while attempting to update the scenario database. |
| Resolution: | Specify valid username and password. |
| Message: | ** Error opening [filename]: [OS error description] |
| Description: | An error occurred opening the specified Nexrad weather file. |
| Resolution: | Ensure file exists. Check user, directory, and file permissions. |
| Message: | [number] pts. |
| Description: | Informational message only |
| Resolution: | n/a |
| Message: | Block [number] error. |
| Description: | Invalid format within weather data. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Config file [filename] not found |
| Description: | The specified file could not be found. |
| Resolution: | Check user, directory, and file permissions. WX config data may be corrupt; overwrite, restore or create new scenario. |
| Message: | EOF reading bds. |
| Description: | Gridded binary weather data has invalid binary data section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | EOF reading block [number] |
| Description: | Invalid format within weather data file. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | EOF reading bms. |
| Description: | Gridded binary weather data has invalid bitmap section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | EOF reading es. |
| Description: | Gridded binary weather data has invalid end section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | EOF reading gds. |
| Description: | Gridded binary weather data has invalid grid description section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | EOF reading pds. |
| Description: | Gridded binary weather data has invalid product description section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error decoding position [position] |
| Description: | An problem was encountered attempting to convert the given position to lat/long. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error decoding tangent pt [tangent value] |
| Description: | Invalid format within weather data. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error determining parameters for [filename] |
| Description: | Invalid format within weather data. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error opening grib file [filename]: [OS error description] |
| Description: | An error occurred attempting to open the specified gridded binary weather file. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error parsing precip file [filename], pass 2: Error determining parameters for [filename]. ignoring. |
| Description: | Invalid weather file. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error parsing wx file [filename]: [error message]. (line [number], col [number]) |
| Description: | Weather file contains improperly formed XML. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error reading bds (tried to read [decimal] ([hex]) bytes, read [decimal] bytes). |
| Description: | An attempt to read a specific number of bytes returned a different number of bytes. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error reading bms. |
| Description: | Gridded binary weather data has invalid bitmap section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error reading es. |
| Description: | Gridded binary weather data has invalid end section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error reading gds. |
| Description: | Gridded binary weather data has invalid grid description section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error reading is: GRIB identifier invalid. |
| Description: | Gridded binary weather data has invalid format. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error reading pds. |
| Description: | Gridded binary weather data has invalid product description section. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | getGridParameters found only [number] blocks. aborting. |
| Description: | Weather product does not contain the expected number of blocks of data. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | getGridParameters requires product(36,37,38, or 81), found [value] |
| Description: | An attempt was made to access an unknown weather product. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | getGridParamters, error opening [filename]: [OS error description] |
| Description: | The specified file could not be opened. |
| Resolution: | Check user, directory, file-permissions. Consult OS documentation. |
| Message: | Layer [nexrad layer] error. |
| Description: | Nexrad weather data has invalid layer format. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | load, error opening [filename]: [OS error description] |
| Description: | The specified file could not be opened to read precipitation data. |
| Resolution: | Check user, directory, file-permissions. Consult OS documentation. |
| Message: | NexContour only works on raster product(37) |
| Description: | Invalid Nexrad weather data product. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | No pd!! |
| Description: | Nexrad weather data contains no product description. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Prod desc error. |
| Description: | Nexrad weather data contains invalid product description. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | RUC file [filename] does not exist. |
| Description: | Config file points to a RUC weather file that does not exist. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | save, error opening [filename]: [OS error description] |
| Description: | The specified file could not be created/opened to write precipitation data. |
| Resolution: | Check disk capacity. Check user, directory, file-permissions. Consult OS documentation. |
| Message: | Unknown gridName [grid name] |
| Description: | An attempt was made to access an unknown grid of binary weather data. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Wx file: nexrad line has no file attribute. Ignoring. |
| Description: | Invalid weather config file, nexrad weather will be ignored. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Wx file: precip line missing required attribute(s). Ignoring. |
| Description: | Invalid weather config file, precipitation weather will be ignored. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Wx file: ruc line has no file attribute. Ignoring. |
| Description: | Config data does not specify location of RUC weather data. |
| Resolution: | Saved data contains incomplete, invalid, or corrupt data; overwrite, restore or create new WX data. |
| Message: | Error opening [filename]: [OS error description] |
| Description: | An error occurred attempting to write weather data to the specified file. |
| Resolution: | Check disk capacity, and user and directory permissions. Consult OS documentation. |
| Message: | Error Saving display [viewer name]: Error opening [weather file] |
| Description: | The specified weather file cannot be written to. |
| Resolution: | Check disk capacity, and user and directory permissions. Consult OS documentation. |
| Message: | ADAPTATION_PATH environment variable not set |
| Description: | The ADAPTATION_PATH environment variables specifies the location of available adaptation collections. |
| Resolution: | Ensure application installation and setup has been completed properly. |
| Message: | Application corruption. |
| Description: | Application corruption detected - GSGT will not be launched. |
| Resolution: | Re-install application. Obtain new source media if problem persists. |
| Message: | GSGT environment variable not set |
| Description: | The GSGT variable specifies the location/version of GSGT to be executed and must be set prior to running a GSGT session. |
| Resolution: | Ensure application installation and setup has been completed properly. |
| Message: | GSGT has not been installed properly. Check your GSGTDIR environment variable. |
| Description: | Installation error. |
| Resolution: | Re-install application. |
| Message: | Ignoring extraneous filename |
| Description: | (Warning) GSGT was launched with a parameter (assumed to be a filename) that will be ignored. |
| Resolution: | n/a |
| Message: | License error : [reason] |
| Description: | A problem occurred attempting to verify license. |
| Resolution: | Re-install or contact support for valid license. |
| Message: | Sorry, the DISPLAY environment variable is not set. |
| Description: | DISPLAY must be exported prior to launching GSGT. |
| Resolution: | Export DISPLAY variable to desired display. |
| Message: | The GSGT license file can no longer be accessed. All license features have been disabled. |
| Description: | Licensing or installation error. |
| Resolution: | Re-install or contact support for valid license. |
| Message: | Unable to load /usr/local/lib/libkdexecutor.so.1.0.0 Record Mode not available |
| Description: | Informational only, not a required module. |
| Resolution: | n/a |
| Message: | Unable to load KDExecutor symbols Record Mode not available |
| Description: | Informational only, not a required module. |
| Resolution: | n/a |
| Message: | Warning : Ignoring extraneous filename. |
| Description: | (Warning) GSGT was launched with a parameter (assumed to be a filename) that will be ignored. |
| Resolution: | n/a |
| Message: | ATCoachMap> error opening [filename]: [OS error description] |
| Description: | An error occurred attempting to open the specified map file. |
| Resolution: | Installation product may be missing or inaccessible. Check file permissions. Re-install. |
| Message: | BinMap> error opening [filename]: [OS error description] |
| Description: | An error occurred attempting to open the specified map file. |
| Resolution: | Adaptation product may be missing or inaccessible. Check file permissions. Re-install or obtain valid adaptation data. |
| Message: | DBMap> error opening [filename]: [OS error description] |
| Description: | An error occurred attempting to open the specified map file. |
| Resolution: | Adaptation product may be missing or inaccessible. Check file permissions. Re-install or obtain valid adaptation data. |
| Message: | Error: dashed_value == [number] |
| Description: | Adaptation map data is invalid. |
| Resolution: | Re-install or obtain valid adaptation data. |
| Message: | Noaamap> error opening [filename]: [OS error description] |
| Description: | An error occurred attempting to open the specified map file. |
| Resolution: | Adaptation product may be missing or inaccessible. Check file permissions. Re-install or obtain valid adaptation data. |
| Message: | SHPFile> error opening [filename]: [OS error description] |
| Description: | An error occurred attempting to open the specified map file. |
| Resolution: | Adaptation product may be missing or inaccessible. Check file permissions. Re-install or obtain valid adaptation data. |
| Message: | Unknown Map type: [value] |
| Description: | Unknown map types cannot be displayed. |
| Resolution: | Installation product may be corrupt, missing or inaccessible. Re-install, contact support if problem persists. |
| Message: | Could Not Start Help Window |
| Description: | Help runs as a separate application which the system is unable to launch. |
| Resolution: | Check system health. Reboot. Verify or re-accomplish application installation. |
| Message: | [adaptation]:[route post] is not an arrival arpt for STAR [adaptation]:[STAR] |
| Description: | self-explanatory |
| Resolution: | Modify route - ensure correct adaptation is being used. |
| Message: | [fix name] is not a departure arpt for pdar [name] |
| Description: | self-explanatory |
| Resolution: | Modify route. |
| Message: | [fix name] is not a departure arpt for sid [name] |
| Description: | self-explanatory |
| Resolution: | Modify route. |
| Message: | [fix name] is not a transition fix for star [name] |
| Description: | self-explanatory |
| Resolution: | Modify route. |
| Message: | [fix name] is not a transition fix on pdr [name] |
| Description: | self-explanatory |
| Resolution: | Modify route. |
| Message: | [route type] [route name] does not intersect [route type] [route name] |
| Description: | Named routings must intersect if they are specified consecutively in a route with no intervening fixes or airways. |
| Resolution: | Modify route. |
| Message: | Arpt [adaptation]:[route post] is not an arrival airport for PDAR [adaptation]:[PDAR] |
| Description: | self-explanatory |
| Resolution: | Modify route - ensure correct adaptation is being used. |
| Message: | At least 2 fixes must be known in originating adaptation on a direct route. |
| Description: | A valid route must contain at least two fixes known in the adaptation. |
| Resolution: | Modify route - ensure correct adaptation is being used. |
| Message: | Attempt to add departure route ([route type] [route name]) to non-departure fix |
| Description: | self-explanatory |
| Resolution: | Modify route. |
| Message: | Can't add identical [route type] [route name] |
| Description: | A route may not contain the same 'named' routing more than once. |
| Resolution: | Modify route. |
| Message: | Dangling away |
| Description: | A valid route cannot end with an airway. |
| Resolution: | Modify route. |
| Message: | Direction fix [adaptation]:[route post] not on away [adaptation]:[airway] |
| Description: | The specified fix is not on the specified airway. |
| Resolution: | Modify route. |
| Message: | Empty airroute. |
| Description: | An empty route is not valid. |
| Resolution: | Modify route. |
| Message: | Empty route text. |
| Description: | Route must contain at least two known fixes. |
| Resolution: | Modify route. |
| Message: | Fix [adaptation]:[route post] does not lie on coded route [adaptation]:[coded route] |
| Description: | Fixes bracketing a coded route must be on the coded route. |
| Resolution: | Modify route - ensure correct adaptation is being used. |
| Message: | Fix [adaptation]:[route post] doesn't lie on away [adaptation]:[airway] |
| Description: | self-explanatory |
| Resolution: | Modify route - ensure correct adaptation is being used. |
| Message: | Fix [adaptation]:[route post] is not a transition fix for SID [adaptation]:[SID] |
| Description: | self-explanatory |
| Resolution: | Modify route - ensure correct adaptation is being used. |
| Message: | Fix [name] not on away [name] |
| Description: | Any use of an airway in a route must be followed by a fix on the airway. |
| Resolution: | Modify route. |
| Message: | Fix [name] not on coded route [name] |
| Description: | Any use of a 'named' routing must be followed by a fix on the 'named' routing. |
| Resolution: | Modify route. |
| Message: | Fixes [adaptation]:[route post] and [adaptation]:[route post] junction at same point on [adaptation]:[airway] |
| Description: | A route may not contain two consecutive items at the same location. |
| Resolution: | Modify route - ensure correct adaptation is being used. |
| Message: | Fixes [route post] and [route post] lie on different segments of [airway] |
| Description: | A route with 'fix.airway.fix' is invalid if both fixes are not on the same contiguous airway segment. |
| Resolution: | Modify route. |
| Message: | Invalid route format -- fix must be first |
| Description: | A valid route cannot begin with an airway or radial. |
| Resolution: | Modify route. |
| Message: | No fixes found |
| Description: | A valid route must contain at least two fixes. |
| Resolution: | Modify route. |
| Message: | Short route: only 1 fix |
| Description: | A valid route must contain at least two fixes. |
| Resolution: | Modify route. |
| Message: | Unknown airroute [name] |
| Description: | The specified 'named' routing is not known in the adaptation. |
| Resolution: | Modify route - ensure correct adaptation is being used. |
| Message: | Unknown fix [fix name] |
| Description: | The specified fix was not found in adaptation. |
| Resolution: | Modify route - ensure correct adaptation is being used. |